Removal

LIGHTING (EXT): AUTOMATIC LIGHT CONTROL SENSOR: REMOVAL

1. PRECAUTION

Upper Instrument Panel

2. POSITION FRONT WHEELS STRAIGHT AHEAD

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system Service Precautions.

4. REMOVE LOWER NO. 3 STEERING WHEEL COVER Removal

5. REMOVE LOWER NO. 2 STEERING WHEEL COVER Removal

6. REMOVE STEERING PAD Removal

7. REMOVE STEERING WHEEL ASSEMBLY Removal

8. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Removal

9. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Removal

10. REMOVE METER HOOD SUB-ASSEMBLY Removal

11. REMOVE COMBINATION METER ASSEMBLY Removal

12. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH Removal

13. REMOVE FRONT PILLAR GARNISH LH Removal

14. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH Removal

15. REMOVE FRONT PILLAR GARNISH RH Removal

16. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY Removal

17. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Multi-Mode Manual Transaxle) Removal

18. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle) Removal

19. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Manual Transaxle) Removal

20. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Automatic Transaxle) Removal

21. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal

22. REMOVE NO. 1 INSTRUMENT PANEL BOX DOOR SUB-ASSEMBLY Removal

23. DISCONNECT INSTRUMENT PANEL WIRE ASSEMBLY Removal

24. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY Removal

25. REMOVE AUTOMATIC LIGHT CONTROL SENSOR

(a) Disconnect the connector.





(b) Disengage the 2 claws and remove the automatic light control sensor.