Installation

2AZ-FE FUEL: FUEL PRESSURE PULSATION DAMPER: INSTALLATION

1. INSTALL FUEL PRESSURE PULSATION DAMPER ASSEMBLY

(a) Apply a light coat of gasoline or spindle oil to a new O-ring and install it to the fuel pressure pulsation damper.





(b) Install the fuel pressure pulsation damper with the 2 bolts.





Torque : 9.0 Nm (92 kgf-cm, 80 in-lbf)

NOTICE:
Make sure that the O-ring is not cracked or does not jump out of position during installation.

2. INSTALL FUEL MAIN TUBE Installation

3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY WITH HOSE Installation

4. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY Installation

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

6. INSPECT FOR FUEL LEAK Fuel System