Installation

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: STEERING ANGLE SENSOR: INSTALLATION

1. INSTALL STEERING ANGLE SENSOR

(a) Align the 2 locating pins, engage the 6 claws, and install the steering angle sensor to the spiral cable.





2. INSTALL SPIRAL CABLE WITH STEERING ANGLE SENSOR Installation

3. INSTALL UPPER STEERING COLUMN COVER Installation

4. INSTALL LOWER STEERING COLUMN COVER Installation

5. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Installation

6. INSTALL NO. 1 SWITCH HOLE BASE Installation

7. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for Manual Transaxle) Installation

8. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for Automatic Transaxle) Installation

9. INSTALL FRONT NO. 1 CONSOLE BOX INSERT Installation

10. INSTALL FRONT NO. 2 CONSOLE BOX INSERT Installation

11. INSTALL FRONT CONSOLE BOX ASSEMBLY (for 2WD) Installation

12. INSTALL FRONT CONSOLE BOX ASSEMBLY (for 4WD) Installation

13. INSTALL CONSOLE BOX CARPET

14. INSTALL NO. 2 SWITCH HOLE BASE Installation

15. INSTALL FRONT UPPER CONSOLE BOX Installation

16. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

17. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Manual Transaxle) Installation

18. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Automatic Transaxle) Installation

19. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) Installation

20. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle) Installation

21. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY Installation

22. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation

23. ADJUST SPIRAL CABLE Installation

24. TURN FRONT WHEELS TO FACE STRAIGHT AHEAD

25. INSTALL STEERING WHEEL ASSEMBLY Installation

26. INSPECT STEERING WHEEL CENTER POINT

27. INSTALL STEERING PAD Installation

28. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation

29. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation

30. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When reconnecting the cable to the negative (-) battery terminal after installing the steering sensor, check that the front tires and steering wheel are kept aligned straight ahead before and after connecting the cable to the negative (-) battery terminal.

31. INSPECT STEERING PAD Installation

32. INSPECT SRS WARNING LIGHT

Diagnosis System