Installation

STEERING COLUMN: STEERING WHEEL: INSTALLATION

1. INSTALL LOWER STEERING WHEEL BOSS COVER

(a) Engage the 2 claws to install the lower steering wheel boss cover to the steering wheel sub-assembly.





(b) Engage the 2 pins.

2. INSTALL CRUISE CONTROL SWITCH WIRE (w/ Cruise Control System)

3. INSTALL CRUISE CONTROL MAIN SWITCH (w/ Cruise Control System) Installation

4. INSTALL NO. 1 STEERING WHEEL ORNAMENT (w/o Steering Pad Switch RH)

(a) Engage the 2 pins and claw to install the No. 1 steering wheel ornament to the steering wheel sub-assembly.





(b) Install the screw.

Torque : 2.4 Nm (24 kgf-cm, 21 in-lbf)

5. INSTALL STEERING PAD SWITCH LH (w/o Steering Pad Switch RH) Installation

6. INSTALL STEERING PAD SWITCH ASSEMBLY (w/ Steering Pad Switch RH) Installation

7. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

8. ADJUST SPIRAL CABLE Installation

9. INSTALL STEERING WHEEL ASSEMBLY

(a) Align the matchmarks on the steering wheel assembly and steering main shaft.





(b) Install the steering wheel assembly set nut.

Torque : 50 Nm (510 kgf-cm, 37 ft-lbf)

(c) Connect the connectors to the spiral cable sub-assembly.

10. INSPECT STEERING WHEEL CENTER POINT

11. INSTALL STEERING PAD

Installation