Removal

REAR SUSPENSION: REAR UPPER ARM: REMOVAL

HINT
* Use the same procedure for the RH side and LH side.
* The procedure listed below is for the LH side.

1. REMOVE REAR SUSPENSION MEMBER

(a) Remove the rear suspension member.

HINT
Refer to the procedure up to Remove Rear Suspension Member Removal.

2. REMOVE UPPER CONTROL ARM ASSEMBLY LH

(a) Put matchmarks on the camber adjust cam assembly, No. 2 camber adjust cam and rear suspension member.





(b) Remove the nut, camber adjust cam assembly and No. 2 camber adjust cam.

(c) Remove the upper control arm assembly.