Installation

TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING RECEIVER: INSTALLATION

1. INSTALL TIRE PRESSURE WARNING ANTENNA AND RECEIVER

(a) Connect the connector.





(b) Install the tire pressure warning antenna and receiver with the bolt.





Torque : 7.5 Nm (76 kgf-cm, 66 in-lbf)

HINT
Engage the 2 tabs into the holes as shown in the illustration to install the tire pressure warning antenna and receiver.

2. INSTALL ROOF SIDE INNER GARNISH LH Installation

3. INSTALL QUARTER PILLAR GARNISH LH Installation

4. INSTALL SIDE DECK TRIM PANEL ASSEMBLY LH Installation

5. INSTALL REAR COMBINATION LIGHT SERVICE COVER LH Installation

6. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for LH Side) Installation

7. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for LH Side) Installation

8. CONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH Installation

9. INSTALL REAR SEAT SIDE GARNISH LH Installation

10. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY (for LH Side) Installation

11. INSTALL REAR DECK TRIM COVER Installation

12. INSTALL LUGGAGE COMPARTMENT TRAY Installation

13. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR Installation

14. INSTALL DECK FLOOR BOX RH Installation

15. INSTALL DECK FLOOR BOX LH Installation

16. INSTALL JACK ASSEMBLY Installation

17. INSTALL JACK CARRIER ASSEMBLY

18. INSTALL NO. 2 DECK BOARD Installation

19. INSTALL DECK BOARD ASSEMBLY Installation

20. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

21. INSTALL REAR SEATBACK ASSEMBLY LH Installation

22. INSTALL REAR SEATBACK INNER HINGE COVER (for LH Side) Installation

23. INSTALL REAR SEATBACK OUTER HINGE COVER (for LH Side) Installation

24. INSTALL REAR SEAT HEADREST ASSEMBLY (for LH Side)

25. INSTALL REAR SEAT CUSHION ASSEMBLY Installation

26. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH Installation

27. INSTALL REAR DOOR SCUFF PLATE LH Installation

28. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

29. INSPECT TIRE PRESSURE WARNING SYSTEM

HINT
Test Mode Procedure.