Installation

U140F AUTOMATIC TRANSMISSION / TRANSAXLE: SPEED SENSOR: INSTALLATION

1. INSTALL SPEED SENSOR NC

(a) Coat a new O-ring with ATF WS and install it to the speed sensor.

(b) Install the speed sensor with the bolt.





Torque : 11 Nm (112 kgf-cm, 8 ft-lbf)

(c) Connect the sensor connector.

2. INSTALL SPEED SENSOR NT

(a) Coat a new O-ring with ATF WS and install it to the speed sensor.

(b) Install the sensor with the bolt.





Torque : 11 Nm (112 kgf-cm, 8 ft-lbf)

(c) Connect the sensor connector.

3. INSTALL TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY

(a) Apply ATF to a new O-ring, and install it to the transmission oil filler tube sub-assembly.

(b) Install the transmission oil filler tube sub-assembly to the automatic transaxle with the bolt.





Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

(c) Connect the transmission wire connector, park/ neutral position switch connector and 2 wire harness clamps.

(d) Install the transmission oil level gauge sub-assembly to the transmission oil filler tube sub-assembly.

4. INSTALL BATTERY CARRIER Installation

5. INSTALL BATTERY Installation

6. INSTALL AIR CLEANER CASE Installation

7. INSTALL AIR CLEANER CAP SUB-ASSEMBLY Installation

8. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY Installation

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL Installation