Replacement

MF1A TRANSFER / 4WD / AWD: TRANSFER CASE FRONT OIL SEAL (for LH Side): REPLACEMENT

1. REMOVE TRANSFER ASSEMBLY

Removal.

2. REMOVE TRANSFER CASE OIL SEAL

(a) Using SST, remove the transfer case oil seal from the transfer case.





SST : 09308-00010

NOTICE:
Do not damage the oil seal contact surface on the case.

3. INSTALL TRANSFER CASE OIL SEAL

(a) Using SST, drive in a new transfer case oil seal into the transfer case until it reaches the position shown in the illustration.





SST : 09608-10010

SST : 09950-70010

09951-07150

Drive in depth:

9.5 to 10.5 mm (0.374 to 0.413 in.)

NOTICE:
Do not tilt the oil seal during installation.

(b) Apply a small amount of MP grease to the lip of the oil seal.

4. INSTALL TRANSFER ASSEMBLY

Installation