Disassembly

2ZR-FE FUEL: FUEL PUMP: DISASSEMBLY

1. REMOVE FUEL SENDER GAUGE ASSEMBLY Removal

2. REMOVE FUEL PUMP

(a) Release the claw and disconnect the fuel pump filter hose.





(b) Remove the E-ring and separate the 2 claws, then remove the fuel pump sub-tank.





NOTICE:
Do not separate the tube indicated in the illustration Service Precautions.

(c) Disconnect the fuel pump harness connector.





NOTICE:
Do not damage the wire harness.

(d) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the No. 1 fuel suction support.





(e) Using a screwdriver with its tip wrapped in protective tape, disengage the 5 claws, and remove the fuel pump filter and fuel pump from the fuel filter.





NOTICE:
* Do not damage the fuel pump filter.
* Do not remove the suction filter.
* Do not use either the fuel pump or the suction filter if the suction filter is removed from the fuel pump.

(f) Disconnect the fuel pump harness connector.





(g) Remove the O-ring from the fuel pump.