Installation

U341E AUTOMATIC TRANSMISSION / TRANSAXLE: TRANSMISSION WIRE: INSTALLATION

1. INSTALL TRANSMISSION WIRE

(a) Coat a new O-ring with ATF WS and install it to the transmission wire.





(b) Pass the transmission wire through the transaxle.





(c) Install the transmission wire with the bolt.





Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY Installation

3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY Installation

4. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY Installation

5. INSTALL BATTERY CARRIER Installation

6. INSTALL BATTERY Installation

7. ADD AUTOMATIC TRANSAXLE FLUID

8. INSPECT AUTOMATIC TRANSAXLE FLUID Procedures

9. INSTALL ENGINE UNDER COVER LH