Repairs and Inspections Required After A Collision

Repairs and Inspections Required After a Collision

1. INSPECTION PROCEDURE FOR VEHICLE INVOLVED IN ACCIDENT

(a) Perform zero point calibration and sensitivity check if any of the following conditions are met:

The occupant classification ECU is replaced.

The passenger airbag ON/OFF indicator indicates OFF when the front passenger seat is not occupied.

The vehicle is brought to the workshop for repair after an accident or a collision.

2. INSPECTION PROCEDURE FOR VEHICLE INVOLVED IN ACCIDENT

(a) If any of the airbags have not deployed, confirm the DTCs by checking the SRS warning light. If there is any malfunction in the SRS airbag system, perform troubleshooting.

(b) If any of the airbags have deployed, replace the airbag sensors and check the installation condition.