Harmonic Balancer - Crankshaft Pulley

Tightening Specifications
Belt Pulley/Vibration Damper 10 Nm (7 ft. lbs.) plus additional 1/4 turn (90°)

Note: Can only be installed in one position; holes are off-set

Crankshaft Toothed Belt Sprocket Bolt 120 Nm (88 ft. lbs.) plus additional 1/4 turn (90°)

Note:
^ Always replace Crankshaft Toothed Belt Sprocket Bolt
^ To loosen and tighten, counter-hold with 3099
^ Threads and shoulder must be free of oil and grease
^ The additional quarter turn can be obtained in several stages.