Intercooler: Locations

Charge Air Cooling System Components, Assembly Overview







1. Air duct
- Clip onto charge air cooler
2. 10 Nm
3. Charge air pressure sensor -G31-
4. O-ring
5. Rubber grommet
- With sleeve
6. 10 Nm
7. Intake hose
- Between intake manifold and charge air cooler
8. Protective matting
- Note installed position
- Must enclose upper hose clip
9. Screw-type clip
- For engine codes AWP, AWV, BKF, BNU connector (with O-ring and securing clamp) instead of screw-type clip
10. Connecting hose
- Between upper air duct pipe and lower air duct pipe
11. Lower air duct pipe
12. Bracket
13. Connecting hose
14. Charge air cooler
- Location: In front of right front wheelhousing