Seat Belt Height Adjuster: Service and Repair

Front Seat Belt Height Adjuster

NOTE: Removal and installation is described for the left-hand side of the vehicle. Removal and installation for the right-hand side is performed in the same manner.

Removing

- Remove upper B-pillar trim

NOTE: Belt anchor or anchor rail does not need to be removed on seat belt.

- Remove bolt - 1 - (40 Nm) and remove belt relay - 2 - from belt height adjuster.







- Remove bolt - 3 - (20 Nm) and separate belt height adjuster - 4 - from mounting in carrier plate.







Installing

- Installation is performed in the reverse order of removal.