Low Mounted Power Steering Pump Assembly Overview

Low Mounted Power Steering Pump Assembly Overview





1 Bracket

2 Hex bolt

• M8 x 40

• Tightening specification => [ Power Steering Pump ] [1][2]Power Steering Pump.

3 Banjo fitting

• M16 x 1.5

• Tightening specification => [ Power Steering Pump ] [1][2]Power Steering Pump.

4 Pressurized line

5 Seals

• Replace

6 Intake hose

7 Spring clip

8 Power steering pump

• Checking delivery pressure => [ Low Mounted Power Steering Pump, Checking Delivery Pressure ] Low Mounted Power Steering Pump, Checking Delivery Pressure.

• Before installing, fill with power steering fluid => [ Low Mounted Power Steering Pump ] Low Mounted Power Steering Pump.

9 Belt pulley

10 Socket head bolt

• M8 x 14

11 Ribbed belt

• Mark direction of travel before removing

• Inspection of condition => Ribbed belt: checking condition

12 Ribbed belt tensioner