Rear Wheel Housing Liner Assembly Overview

Rear Wheel Housing Liner Assembly Overview

• The wheel housing liner may differ slightly depending on the model.

• The illustration shows a left fender. The right fender is identical.






1 Wheel housing liner

• PP/EPDM material

• Removing and Installing, refer to => [ Rear Wheel Housing Liner ] Rear Wheel Housing Liner

2 Bolt

• Quantity: 10

• Tightening specification: 2 Nm

3 Expanding nut

• Quantity: 5

• Replace if damaged

4 Expanding nut

• Gas-tight


• Check the gas-tight expanding nuts for damage and replace if necessary.

• The expanding nuts seal off the passenger compartment from exhaust gas and must always be replaced if they are damaged.