Power Exterior Mirror

Power Exterior Mirror

• The following describes removing and installing the right exterior mirror. Removing and installing the left door lock is identical.

Removing






- Removing front door trim.

- Disconnect the connector - 2 - from the exterior mirror - 1 -.

- Remove the screw - 3 - from the exterior mirror - 1 -.






- Move the exterior mirror - 1 - at the bottom slightly from the door - arrow a - and remove it from the window guide - 2 - - arrow b -.

- Guide the electric wire through the opening in the door and remove the exterior mirror - 1 -.

Installing






- Make sure the foam piece - 4 - fits correctly inside the door.

- Guide the electric wire - 3 - through the opening into the door.

- Push the exterior mirror - 1 - into the window guide - 2 - from underneath - arrow a - and attach it to the door - arrow b -.






- Install the screw - 3 - into the exterior mirror - 1 - and tighten it.

Bolt - 3 - tightening specification: 8 Nm.

- Connect the connector - 2 - to the exterior mirror - 1 -.

- Install the trim panel.