Checking Signal Cable To TMC/FM Receiver

Checking signal cable to TMC/FM receiver

Check, connectors and cables
Check the RTI control module and TMC/FM receiver connectors for contact resistance and oxidation according to Checking wiring and terminals. Permanent fault Checking Wiring and Terminals. Permanent Fault.
Check cable between the control module #B15 and TMC/FM receiver terminal 4 for an open-circuit according to Checking wiring and terminals. Permanent fault Checking Wiring and Terminals. Permanent Fault , a short-circuit to ground according to Checking wiring and terminals. Permanent fault Checking Wiring and Terminals. Permanent Fault and a short-circuit to supply voltage according to Checking wiring and terminals. Permanent fault Checking Wiring and Terminals. Permanent Fault.
Remedy as necessary.

Other information:
- To access/replace the control module, see Replacing the control module, old system Replacing the Control Module, Old System.
- To access/replace the TMC receiver, see Replacing TMC receiver Replacing TMC Receiver.
- To access/replace the FM receiver, see Replacing the FM receiver Replacing the FM Receiver.
- For connecting breakout box, see Connecting the breakout box Connecting the Breakout Box.













Was a fault detected?

Yes - FAULT FOUND

No - No Fault Found

-------------------------------------------------