Bushing Outer Control Arm Lower, Replace

Bushing Outer Control Arm Lower, Replace

Removal

Note! As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the essential information in the illustrations is always correct.

Removing The Shock Absorber And Spring

- Remove the shock absorber and spring.

Removing The Bushing

- Pull the bushing out.





Installation

Installing Bushing

- Clean the control arm. Lubricate the control arm using petroleum jelly.
- Use tool 951 2923 with 999 7054, ~#99 7Q3~5, 9()9 7Q47 and 999 7034
- Pull the bushing.

Installing The Shock Absorber And Spring

- Install the rear spring and the shock absorber.