Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition
The central electronic module checks the signal from the right Xenon lamp.
Diagnostic trouble code (DTC) CEM-8F19 is stored in the central electronic module if the central electronic module registers a fault in the actuator motor for the right xenon lamp.
Diagnostic trouble code (DTC) CEM-8F19 can be detected with the ignition on and switching between low and high beam.

Substitute value
- None.

Possible source
- The actuator motor in the xenon lamp housing has jammed
- Defective actuator motor in the xenon lamp housing.

Fault symptom[s]
- The low beam is constantly lit
- The high beam is constantly lit
- The road surface is not illuminated.
- Headlights/Headlight aim is off