Integrated Booster Cushion Outer

Integrated booster cushion outer

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Removal

Removing booster cushions




Fold up the booster cushion.

Remove:
- the 2 M6 screws at the rear edge
- the 2 M6 screws at the front edge.




Detach the apron molding from the booster cushion. It is secured with 4 clips on the underneath of the booster cushion.
Remove the booster cushion from the vehicle.

Installation

Note! For tightening torques, see Specifications. [1][2]Body and Frame

Installing booster cushions
Secure the apron molding on the underneath of the booster cushion using 4 clips.
Press into place.

Install:
- the 2 M6 screws at the rear edge
- the 2 M6 screws at the front edge.

Finishing

Function test
Check the function of the booster cushion.