Signal Missing

Signal missing. Permanent fault

Checking control panel terminals
Check that the control panel is correctly connected to the seat.
Check the control circuit between #C4 and #C5. Check for an open-circuit. See Checking wiring and terminals. Permanent fault Checking Wiring and Terminals. Permanent Fault.
Remedy as necessary

Other information:
- To connect the breakout box, see Connecting the breakout box, power seat module (PSM) Connecting the Breakout Box, Power Seat Module (PSM)
- For information about signals, see Signal specification, Power seat module Signal Specification, Power Seat Module (PSM).













Was a fault detected?

Yes - Fault Found

No - Replacing the component

-------------------------------------------------

Replacing the component
Replace the control panel. See Side panel, replacing Removal and Replacement.


Continue - Fault Found

-------------------------------------------------