Diesel Data: Automotive Repair

Spoiler, Front






Spoiler, front

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Information

Important information

Note! This method only applies to the S40 Sport and V50 Sport.

Removal

Removing the front spoiler





Remove:
- the 3 x screws.




- the 2 x screws on each side.




- the clips (1), 1 per side
- the 2 x screws for the brackets for the air baffle
- the air baffle.

Caution! Be careful with the ends of the air baffle, they break off easily.

Pull off the spoiler from the 19 x bumper cover catches

Hint: Start with the end nuts.

Installation

Note! For tightening torques, see Specifications. [1][2]Body and Frame

Installing the front spoiler

Caution! Clean the surfaces of the bumper cover where the new spoiler section is to be secured. Otherwise there is risk of paintwork damage.

Press the new spoiler section into place on the bumper cover.

Hint: Start in the center. Check that the catches engage.





Install:
- the 2 x clips (1)
- the air baffle
- the 2 x screws for the brackets for the air baffle. Tighten.




- the 2 x screws on each side. Tighten.




- the 3 x screws.