Lower Torque Rod

Lower torque rod

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Preparatory work

Remove the engine splash guard.

Removing the torque rod





Remove:
- the 1 screw (1)
- the 1 screw (2)
- the engine stabilizer brace.

Installing the engine stabilizer brace

Note! For tightening torques, see Specifications. Tightening Torque

Install:
- the engine stabilizer brace
- the 2 M12 screws.