Torque Rod Lower, Replacing

Torque rod lower, replacing

Note: The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Preparatory work
Remove the engine splash guard.

Removing the torque rod
Remove:





- the 1 screw (1)
- the 1 screw (2)
- the engine stabilizer brace.

Installing the engine stabilizer brace

Note: For tightening torques, see Specifications

Install:
- the engine stabilizer brace
- the 2 M12 screws.