Transfer Case Seal RH

Transfer Case Seal RH

Note! Some variation in the illustrations may occur, but the essential information is always correct.

Removal

Removing drive shaft right-hand side
Remove the right-hand driveshaft. Drive Shaft Right

Removing the sealing ring




Outer sealing ring. 999 5919 PULLER 999 5919 Puller.




951 2943 L-hook 951 2943 L-Hook.

Installation

Installing a new sealing ring




999 7190 Drift 999 7190 Drift , extend if necessary.
999 1801 STANDARD SHAFT 999 1801 Standard Shaft.




999 7190 Drift 999 7190 Drift , extend if necessary.
999 1801 STANDARD SHAFT 999 1801 Standard Shaft.

Finishing

Checking the oil level in the bevel gear




Check the oil level in the bevel gear.
Use oil. Refer to: Lubrication transmission Specifications
Fill up oil to the oil filler plug. Suck out 0.1 l oil.
Torque: Oil filler plug, bevel gear, 35 Nm

Install the right-hand driveshaft. Drive Shaft Right