Verification

Verification

Note! When the transmission's control module has been removed and reinstalled, it is important that the gear position sensor is calibrated. Select Pause and create a bookmark. Then select Vehicle communication.

Hint: After carrying out the repair, check that the fault has been remedied.








- Ignition off.
- Reinstall the connectors, components etc.
- Test drive the vehicle following: Test drive schedule, description, B6304T4, TF-80SC AWD, B6324S5, TF-80SC AWD, B6324S5, TF-80SC, B6324S4, TF-80SC, B6324S4, TF-80SC AWD Test Drive Schedule, Description
Check that the transmission does not display any obvious function faults.

Note! When test driving, the oil temperature must be above 20 °C.

Is the function OK?

Yes - VERIFIED

No - VERIFICATION FAILED

-------------------------------------------------