The Tolerance Checking Has Not Been Run

The tolerance check has not been run

Checking the diagnostic trouble codes (DTCs)
If diagnostic trouble code (DTC) BCM-A031 is stored on its own it must be erased.
If diagnostic trouble code (DTC) BCM-0111 is stored at the same time as BCM-A031, read off the diagnostic trouble codes (DTCs) from the steering wheel module (SWM). Fault-trace the system.
Select an option:
1. Diagnostic trouble code (DTC) BCM-A031 is stored on its own
2. Diagnostic trouble codes (DTCs) BCM-0111 and BCM-A031 are stored at the same time.






1 - Erasing diagnostic trouble code (DTC)

2 - DONE

-------------------------------------------------

Erasing diagnostic trouble code (DTC)




Erasing diagnostic trouble codes (DTCs)

Erasing diagnostic trouble codes (DTCs)




- Ignition on.
Erase diagnostic trouble codes (DTCs).





Continue - DONE

-------------------------------------------------