Dashboard Speaker Cover Removal/Installation

Dashboard Speaker Cover Removal/Installation

NOTE:

- Take care not to scratch the dashboard or the related parts.

- When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.

1. Apply protective tape (A) to the dashboard beside the side edge of the speaker cover (B). Pry up on the edge of the cover with a flat-tip screwdriver to detach the clips (C).

2. Pull out the speaker cover to detach remaining clips (D), then remove the cover.

3. Install the cover in the reverse order of removal, and note these items:
- If the clips are damaged, replace them with new ones.

- Push the clips into place securely.