Front Grille Replacement

Front Grille Replacement

Front Grille Replacement

NOTE:

- Take care not to scratch the front bumper.

- When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.

1. Remove the front bumper. Service and Repair

2. Remove the front grille (A).
-1 Remove the screws and detach the clips.
Release the hooks (B) and the ribs (C) from the front bumper (D).

3. Install the grille in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.

- Push the clips and the hooks into place securely.





Front Grille Molding Replacement

NOTE:

- Take care not to scratch the front grille.

- When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.

1. Remove these items:
- Front grille

- Front "A" emblem Service and Repair

2. Remove the front grille upper molding (A).
-1 Remove the screws.
Release the hooks (B) (six places) with a flat-tip screwdriver from the front grille base (C).
-3 Release the tabs (D) (five places) from the hood center seal (E).






3. Remove the screws, and pull out the front grille lower molding (A) to release the hooks (B) from the front grille base (C), then remove the front grille lower molding.

4. Remove the hood seal (D) from the tabs (E) on the front grille lower molding.

5. Install the moldings in the reverse order of removal, and note these items:
- Make sure the tabs on the moldings engage the seal securely.

- Push the hooks into place securely.