Upper Transmission Mount Removal/Installation

Upper Transmission Mount Removal and Installation

Removal

1. Remove the engine compartment covers. Service and Repair

2. Remove the air cleaner assembly. Service and Repair

3. Lift and support the engine with a jack and a wood block under the transmission.

4. Remove the harness clamp (A), then remove the upper transmission mount bracket mounting bolts and nut.
NOTE: Do not remove the TORX bolt (B) from the upper transmission mount. If the TORX bolt is removed, the upper transmission mount must be replaced as an assembly.






5. Remove the upper transmission mount.






Installation

1. Replace the upper transmission mount bolt. Automatic Transmission Installation

2. Install the upper transmission mount.






3. Loosely install the upper transmission mount bracket mounting bolts and nut, then install the harness clamp (A).

4. Remove the jack and the wood block.

5. Tighten the upper transmission mount bracket mounting bolts and nut.

6. Install the air cleaner assembly. Service and Repair

7. Install the engine compartment covers. Service and Repair