Diesel Data: Automotive Repair

Spoiler







Spoiler

After painting, the spoiler of the TT RS is assembled from the components shown in the assembly overview.

The spoiler is not designed for disassembly.

Removing






- Remove the lower rear lid trim.

Roadster:

- Expose electrical wiring harness - 1 - on the line channel - arrows -.

- Detach the control cable from mount - 3 -. Refer to => [ Rear Lid ] Rear Lid.

- Remove control cable and line channel mount - 2 - from the rear lid.

All vehicles:






- Disconnect the connector - 1 -.

- At the locations indicated by - arrows -, unscrew nuts - 2 -.

- Remove the lower part of the spoiler.

Installation

For the correct tightening specifications, refer to => [ Rear Spoiler Assembly Overview ] Spoiler - TT RS.

Install in reverse order of removal. Note the following:

- Attach the control cable at the mount. Refer to => [ Rear Lid ] Rear Lid

- Install the lower rear lid trim.