Bringing Front Seats Into Service Position

Bringing Front Seats Into Service Position

Special tools, testers and auxiliary items required

• Trim removal wedge (3409)






Service Position, Implementing

- Bring headrest into lowest lock position.

- Move seat as far back and up as possible.

Only with Electrically Adjustable Seat






• The surrounding area was not shown in the illustration for clarity purposes.

- Pry cover caps - 1 - from seat rail covers - 3 - and seat fore/aft adjustment spindle - 2 - with Trim Removal Wedge (3409).

Procedure for All Vehicles






- Unclip rear cover - 1 - with the trim removal wedge (3409) and pull the cover in the direction of - arrow - off of connector station - 2 -.

• Do not disconnect electrical wires.

Service Position, Resetting

Install in reverse order of removal. Note the following:

- Make sure the cover tab slides into connector station correctly.

- Engage the cover correctly with the connector station.