Left Flange Shaft Seal, Replacing

Left Flange Shaft Seal, Replacing

Special tools, testers and auxiliary items required

• Thrust Piece (3305)

• Pulling Hook (T20143)

Removing

Proceed as follows:

• Shaft seal can be replaced with transmission installed.

• Observe general repair notes. Refer to => [ Repair Instructions ] Repair Instructions.

• Observe cleanliness rules when working on transmissions. Refer to => [ Clean Working Conditions ] Clean Working Conditions.

- Remove left drive flange. Refer to => [ Left Flange Shaft ] Left Flange Shaft.

- Remove shaft seal with (T20143/2).





Installing

- Fill space between sealing and dust lips - arrow - halfway with sealing grease; sealing grease. Refer to the electronic parts catalog ETKA.





- Drive in new shaft seal with (3305) to stop, do not tilt sealing ring.





- Install left flange shaft. Refer to => [ Left Flange Shaft ] Left Flange Shaft.

- Gear oil level, checking and topping off. Refer to => [ Gear Oil Level, Checking and Filling ] Gear Oil Level, Checking and Filling.