Right Flange Shaft Seal, Replacing

Right Flange Shaft Seal, Replacing

Special tools, testers and auxiliary items required

• Thrust Piece (3377)

• Pulling Hook (T20143)

Removing

Proceed as follows:

• Shaft seal can be replaced with transmission installed.

• Observe general repair notes. Refer to => [ Repair Instructions ] Repair Instructions.

• Observe cleanliness rules when working on transmissions. Refer to => [ Clean Working Conditions ] Clean Working Conditions.

- Remove right flange shaft. Refer to => [ Right Flange Shaft ] Right Flange Shaft.

- Remove shaft seal with (T20143/2).





Installing

- Drive in new shaft seal as far as stop using (T10049).





- Fill space between sealing and dust lips - arrow - halfway with sealing grease; sealing grease. Refer to the electronic parts catalog ETKA.





- Install right flange shaft. Refer to => [ Right Flange Shaft ] Right Flange Shaft.

- Gear oil level, checking and topping off. Refer to => [ Gear Oil Level, Checking and Filling ] Gear Oil Level, Checking and Filling.