Front Bumper Fascia Upper Support Replacement

Front Bumper Fascia Upper Support Replacement


Removal Procedure





1.Remove the push-in retainers from the upper grille.





2.Remove the bolts from the rear of the front fascia support.





3.Pull back the upper grille and remove the push-in retainers from the upper fascia support.





Important:The upper fascia support must clear the hood latch.

4.Pull back the upper grille and remove the upper fascia support pulling up and forward.

Installation Procedure





Important:The upper fascia support must clear the hood latch.

1.Pull back the upper grille and install the upper fascia support sliding down and back.





2.Pull back the upper grille and install the push-in retainers to the upper fascia support.





3.Install the push-in retainers to the upper grille.





Notice:Refer to Fastener Notice .

4.Install the bolts to the rear of the front fascia support.

TightenTighten the bolts to 10 N �m (89 lb in).