Sunroof / Moonroof Panel: Adjustments

Sunroof Window Height and Opening Fit Adjustment

1. Open the sunshade.
2. Close the sunroof window.




3. Loosen the adjusting screws on each side of the sunroof window.

* Crew Cab has two screws.
* Extended Cab has three screws.

4. Adjust the corners of the window panel using the following guidelines:

* Adjust the front of the sunroof window flush to 2 mm (0.08 in) below the top surface of the roof panel.
* Adjust the rear of the sunroof window flush to 2 mm (0.08 in) above the top surface of the roof panel.


Notice: Refer to Fastener Notice (Fastener Notice) .

5. Install the sunroof window adjustment screws.

Tighten the screws to 4 N.m (35 lb in).


* Crew Cab has two screws.
* Extended Cab has three screws.