Coolant Heater Cord Replacement (LZ9)

Coolant Heater Cord Replacement (LZ9)

Removal Procedure





1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle (Service Intervals) .
2. Disconnect the engine coolant heater cord from the engine coolant heater.
3. Lower the vehicle.




4. Remove the coolant heater cord clips from the transmission range selector lever cable bracket.




5. Remove the coolant heater cord from between the shock tower and battery tray.



Installation Procedure





1. Install the coolant heater cord between the shock tower and battery tray.




2. Install the coolant heater cord clips to the transmission range selector lever cable bracket.




3. Raise and support the vehicle.
4. Connect the engine coolant heater cord to the engine coolant heater.
5. Lower the vehicle.