Transmission Mount Replacement - Left Side

Transmission Mount Replacement - Left Side

Removal Procedure

1. Remove the battery tray. Refer to Battery Tray Replacement (Battery Tray Replacement).
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
3. Remove the front compartment splash shield. Refer to Front Compartment Splash Shield Replacement (Front Compartment Splash Shield Replacement).
4. Install the engine support fixture. For the 1.4L engine, refer to Engine Support Fixture (1. Engine Support Fixture).
For the 1.8L engine, refer to Engine Support Fixture (1. Engine Support Fixture).
5. Lower the vehicle.




6. Remove and DISCARD the left transmission mount to bracket bolts (1).




7. Remove the left transmission mount to body bolts (1).
8. Remove the left transmission mount to body nut (2).
9. Remove the transmission mount (3) from the vehicle.

Installation Procedure




1. Install the left transmission mount (3) to the vehicle.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the transmission mount to body bolts (1) and tighten to 62 Nm (46 lb ft).
3. Install the transmission mount to body nut (2) and tighten to 62 Nm (46 lb ft).




4. Install the NEW left transmission mount to transmission bolts (1) and tighten to 50 Nm + 60°-75° (37 lb ft + 60°-75°).
5. Raise the vehicle.
6. Remove the engine support fixture.
7. Install the front compartment splash shield. Refer to Front Compartment Splash Shield Replacement (Front Compartment Splash Shield Replacement).
8. Lower the vehicle.
9. Install the battery tray. Refer to Battery Tray Replacement (Battery Tray Replacement).