Canister Vent Valve: Service and Repair

Evaporative Emission Canister Vent Solenoid Valve Replacement

Removal Procedure

Note:
Clean the evaporative emission (EVAP) connections and surrounding areas prior to disconnecting the line in order the avoid possible system contamination.





1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.

2. Disconnect the EVAP canister vent solenoid valve electrical connector.





3. Disconnect the EVAP canister vent solenoid valve from the EVAP emission canister hose.





4. Remove the EVAP canister vent solenoid valve bracket bolt.

5. Remove the EVAP canister vent solenoid valve.

Installation Procedure





1. Install the EVAP canister vent solenoid valve.

Caution:
Refer to Fastener Caution Fastener Caution.

2. Install the EVAP canister vent solenoid valve bracket bolt.

Tighten the bolt to 10 Nm (89 lb in).





3. Connect the EVAP canister vent solenoid valve to the EVAP emission canister hose.





4. Connect the EVAP canister vent solenoid valve electrical connector.

5. Lower the vehicle.