Steering Column Electronic Lock Replacement

Steering Column Electronic Lock Replacement

Removal Procedure

1. Remove the steering shaft upper bearing spring. Refer to Turn Signal Cancel Cam and Steering Shaft Upper Bearing Spring Replacement (Manual) Turn Signal Cancel Cam and Steering Shaft Upper Bearing Spring Replacement (Manual)Turn Signal Cancel Cam and Steering Shaft Upper Bearing Spring Replacement (Telescoping) Turn Signal Cancel Cam and Steering Shaft Upper Bearing Spring Replacement (Telescoping).

2. Remove the turn signal and headlamp dimmer switch assembly. Refer toTurn Signal Multifunction Switch Replacement Turn Signal Multifunction Switch Replacement.

3. Remove the windshield wiper and windshield washer switch from the steering column. Refer to Windshield Wiper and Washer Switch Replacement Service and Repair.




4. Remove the two screws (1) securing the steering column lock (2) to the steering column.

5. Remove the steering column electric lock (2) from the steering column.

Installation Procedure

1. Install the steering column electric lock to the steering column.




2. Install the two screws (1) securing the steering column lock (2) to the steering column.

Tighten the screws to 11 Nm (97 lb in).

3. Install the windshield wiper and windshield washer switch to the steering column. Refer to Windshield Wiper and Washer Switch Replacement Service and Repair.

4. Install the turn signal and headlamp dimmer switch assembly to the steering column electric lock. Refer toTurn Signal Multifunction Switch Replacement Turn Signal Multifunction Switch Replacement.

5. Install the steering shaft upper bearing spring. Refer to Turn Signal Cancel Cam and Steering Shaft Upper Bearing Spring Replacement (Manual) Turn Signal Cancel Cam and Steering Shaft Upper Bearing Spring Replacement (Manual)Turn Signal Cancel Cam and Steering Shaft Upper Bearing Spring Replacement (Telescoping) Turn Signal Cancel Cam and Steering Shaft Upper Bearing Spring Replacement (Telescoping).