Clutch Master Cylinder Reservoir Hose Replacement

Clutch Master Cylinder Reservoir Hose Replacement

Removal Procedure





Note:
Before disconnecting the reservoir tank hose, remove the clutch/brake fluid from the reservoir tank.

1. Remove the clutch master cylinder reservoir hose (1) from the reservoir tank.

2. Remove the clutch master cylinder reservoir hose from the clutch master cylinder.

Installation Procedure





1. Install the clutch master cylinder reservoir hose (1) to the reservoir tank and the master cylinder.

2. Bleed The hydraulic clutch system. Refer to Hydraulic Clutch System Bleeding Service and Repair.

3. Fill the reservoir with GM approved brake fluid from a clean, sealed brake fluid container up to the MAX level.