Engine Mount Replacement - Right Side

Engine Mount Replacement - Right Side (L96)

Removal Procedure

Caution: When raising or supporting the engine for any reason, do not use a jack under any sheet metal, or the crankshaft pulley, or damage may occur.

1. Remove the right engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side (L96) Engine Mount Bracket Replacement - Right Side.




2. Working through the wheelhouse opening, remove the engine mount to engine block bolts (1).

3. Using the adjustable jack, raise the engine slightly until there is enough clearance to remove the engine mount.




4. Remove the engine mount through the rear of the wheel well opening.

Installation Procedure




1. Position the engine mount to the engine block.





Caution: Refer to Fastener Caution Fastener Caution.

2. Working through the wheelhouse opening, install the engine mount to engine block bolts (1).

Tighten the bolts to 50 Nm (37 lb ft).

3. Install the right engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side (L96) Engine Mount Bracket Replacement - Right Side.