Speaker - Installation

INSTALLATION






FRONT DOOR SPEAKER






NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. Battery Reconnection.

1. Connect electrical harness connector and position speaker.
2. Install and tighten mounting fasteners.
3. Install front door trim panel Installation.
4. Connect battery negative cable.


INSTRUMENT PANEL SIDE SPEAKER






NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. Battery Reconnection.

1. Connect electrical harness connector and position speaker.
2. Install and tighten mounting fasteners.
3. Install speaker cover to instrument panel.
4. Connect battery negative cable.


INSTRUMENT PANEL CENTER SPEAKER






NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. Battery Reconnection.

1. Connect electrical harness connector and position speaker.
2. Install and tighten mounting fasteners.
3. Install speaker cover to instrument panel.
4. Connect battery negative cable.


REAR SPEAKER - SEDAN






NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. Battery Reconnection.

1. Connect electrical harness connector and position speaker.
2. Install and tighten mounting fasteners.
3. Install the rear shelf trim Installation.
4. Install the lower C-pillar trim C-Pillar Trim Panel-Installation.
5. Install the upper C-pillar trim C-Pillar Trim Panel-Installation.
6. Connect the battery negative cable.


REAR SPEAKER - WAGON






NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. Battery Reconnection.

1. Connect electrical harness connector and position speaker.
2. Install and tighten mounting fasteners.
3. Install the speaker grille trim Quarter Trim Speaker Bezel - Installation.
4. Connect the battery negative cable.


SUBWOOFER - REAR SHELF






NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. Battery Reconnection.

1. Connect electrical harness connector and position subwoofer.
2. Install and tighten mounting fasteners.
3. Install the rear shelf trim Installation.
4. Install the lower C-pillar trim C-Pillar Trim Panel-Installation.
5. Install the upper C-pillar trim C-Pillar Trim Panel-Installation.
6. Connect the battery negative cable.


SUBWOOFER - SEDAN






1. Install the subwoofer (1) to the vehicle.
2. Connect the electrical connector (3).
3. Install the top mounting fastener (2).
4. Connect the battery negative cable.
5. Close the decklid.


SUBWOOFER - WAGON






1. Install the subwoofer (1) to the vehicle.
2. Connect the mounting fastener (5).
3. Connect the electrical connector (3).
4. Raise the rear seat back.
5. Connect the battery negative cable.