Installation

INSTALLATION





NOTE: Coat all bearing and sliding surfaces on the expanding lock with Anti-seize.

1. Install the parking brake adjuster (1).
2. Install the upper return spring (2).
3. Install the parking brake shoes by placing the assembly over rear axle shaft flange.
4. Install the hold down spring (3) by using a pair of needle-nose pliers (2).




5. Install the return spring by using a hooked tool or needle-nose pliers (2).




6. Tighten the bolt (3) on the parking brake cable equalizer. Parking Brake Cable - Installation.




7. Install the disc brake rotors (1). Brake Rotor - Installation.




8. Install the caliper assembly bolts (1). Disc Brake Caliper - Installation.
9. Install the wheel and tire assembly. Procedures.