Installation

INSTALLATION





CAUTION: Vehicle must be at normal ride height before tightening components to specified torque.

1. Install the camber strut onto the vehicle.
2. Install the outer camber strut bolt attaching the camber strut to the wheel carrier.
3. Install the inner camber strut bolt attaching the camber strut to the rear axle carrier.
4. Install the wheel and tire assembly.
5. Lower the vehicle so it is not being supported by the lift.
6. Tighten the outer camber strut bolt attaching the camber strut to the wheel carrier to 70 Nm (52 ft. lbs.).
7. Tighten the inner camber strut bolt attaching the camber strut to the rear axle carrier to 70 Nm (52 ft. lbs.).
8. Check vehicle alignment. Service and Repair.