Floor Console - Installation

INSTALLATION





1. Position the floor console into the vehicle and connect the electrical connectors.
2. Install the fasteners (3) at the front of the center console. Tighten the screws to 3 Nm (27 in. lbs.).
3. Install the fasteners (2) into the rear bin. Tighten the bolts to 5 Nm (44 in. lbs.).




4. Position the console shifter bezel (1) into the vehicle.
5. Connect the electrical connectors.
6. Position the mat (5) into the console rear bin.
7. Install the shifter boot and bezel.





8. Place the gear selector lever into the Park position.
9. Slide the retaining ring over the shifter shaft (2) and slide the shift knob (1) onto the shaft (2) and slide down into place fully.





10. Seat the retaining ring (2) up onto the shifter knob (2) and seat fully.
11. Connect the battery negative cable.