Headliner - Installation

INSTALLATION






NOTE: In the event the headliner is damaged or creased during removal, it will need to be replaced with a new headliner.

1. Carefully insert the headliner (1) through the windshield opening.
2. Position the headliner into position.
3. Connect the electrical connectors.
4. Firmly press the headliner into position ensuring the spring clip retainers engage.
5. If equipped, install the trim welt onto the headliner sunroof opening.
6. Install both grab handle/coat hook/rear dome/reading lamp units into the headliner at the inner rear roof side rails.
7. Install both sun visors and both visor receptacles onto the headliner near the windshield header.
8. If equipped, connect the electrochromic (automatic dimming) and/or the telematic (hands-free phone) mirror takeout and connector of the headliner wire harness to the connector receptacle(s) on the back (windshield side) of the inside rear view mirror housing.
9. If equipped, install the overhead console to the center of the headliner near the windshield header,Front Overhead Console - Installation.
10. Install the upper quarter trim panel, Quarter Trim Panel - Installation.
11. Connect the electrical connectors at the A-pillars.
12. Install A-pillar trim panels, A-Pillar Trim Panel - Installation.
13. Install the windshield, Windshield - Installation.
14. Connect the negative battery cable.