Speaker Walk-Around Test

SPEAKER WALK-AROUND TEST

NOTE: To enter the speaker walk-around test or the audio unit self-diagnostic mode, the audio unit must be ON and in radio tuner mode (AM/FM). The audio unit self-diagnostic mode can only be entered while in the speaker walk-around test.

1. To enter the speaker walk-around test, simultaneously press the audio unit preset buttons 3 and 6.
2. The speaker walk-around test stops at each speaker and applies a different tone to each speaker for about 1-2 seconds. Each speaker is tested and displayed on the audio unit in the following sequence: RF, LF, LR, RR, Subwoofer I, Subwoofer II.
3. The speaker walk-around test automatically continues and tests for speaker short. If a speaker short exists, SPKR SHORT will be displayed.