Driver/Vehicle Information Display: Service and Repair

Message Center Configuration

Oil Life Reset

NOTE: This procedure resets the oil life telltale in the Instrument Panel Cluster (IPC), and the oil change reminder message in the message center display.

1. Press the brake and accelerator pedals at the same time.

2. Turn the ignition switch to the RUN position (do not start the engine).
- For vehicles with push-button start, push the start/stop switch and release quickly, do not attempt to start the engine.

3. Keep the pedals fully depressed for a minimum of 20 seconds.

4. Rotate the key to the OFF position.
- For vehicles with push-button start, push the start/stop switch to turn the vehicle off completely.

5. Start the vehicle. Make sure that the oil life telltale is not illuminated in the IPC, and the oil change reminder message is no longer displayed in the message center.